Configuring iTegno 3000 with gnokii

Configuring iTegno 3000 with gnokii

Hi guys, in this time i want to share my experience on configuring iTegno 3000 with Linux.

I have bought a RS232 GSM modem iTegno 3000 from Data Sari Citra.
If you are an Indonesian, you can buy this modem at

EAZY PHONE
ITC Kuningan Lt.3 Blok C.1 No.3A
Ph 021 – 70233445
Fax 021 – 57934788

Below are the product specification :

Product Specification
Size / Weight: 93mm x 64mm x 12mm / 58g
Embedded antenna
GPRS Class 10:
Coding scheme CS1 to CS4
Max. packet-switched data transmission speed: 85.6kbps
Dual band GSM (ETSI GSM Phase 2+):
Class 4 (2W @ 900Mhz)
Class 1 (1W @ 1800Mhz)

After download, configure, make and install gnokii. I’m able to send a sms from gnokii CLI.

You can use this syntax from gnokii CLI for sending a sms :

root@asep-ubuntu:~# gnokii –sendsms +6285659969486

The gnokii identified iTegno 3000 as a Wavecom Modem

root@asep-ubuntu:~# gnokii –identify

GNOKII Version 0.6.10
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: AT
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 115200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone …
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d | ATZ
write: [ATZ]
read : [OK]
Message received: 0x00 / 0x0004
02 4f 4b 0d | OK
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d | ATE1
write: [ATE1]
read : [OK]
Message received: 0x00 / 0x0004
02 4f 4b 0d | OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1
write: [AT+CMEE=1]
read : [AT+CMEE=1OK]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d | AT+CMEE=1 OK
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM]
read : [AT+CGMM MULTIBAND 900E 1800 OK]
Message received: 0x06 / 0x0029
02 41 54 2b 43 47 4d 4d 0d 0d 0a 20 4d 55 4c 54 | AT+CGMM MULT
49 42 41 4e 44 20 20 39 30 30 45 20 20 31 38 30 | IBAND 900E 180
30 20 0d 0a 0d 0a 4f 4b 0d | 0 OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d | AT+CGMI
write: [AT+CGMI]
read : [AT+CGMI WAVECOM MODEMOK]
Message received: 0x06 / 0x0020
02 41 54 2b 43 47 4d 49 0d 0d 0a 20 57 41 56 45 | AT+CGMI WAVE
43 4f 4d 20 4d 4f 44 45 4d 0d 0a 0d 0a 4f 4b 0d | COM MODEM OK
Received message type 06
Message sent: 0x61 / 0x0009
41 54 2b 43 53 43 53 3f 0d | AT+CSCS?
write: [AT+CSCS?]
read : [AT+CSCS?+CSCS: “PCCP437″OK]
Message received: 0x61 / 0x0023
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC
53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: “PCCP437”
4f 4b 0d | OK
Received message type 61
Initialisation completed
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM]
read : [AT+CGMM MULTIBAND 900E 1800 OK]
Message received: 0x06 / 0x0029
02 41 54 2b 43 47 4d 4d 0d 0d 0a 20 4d 55 4c 54 | AT+CGMM MULT
49 42 41 4e 44 20 20 39 30 30 45 20 20 31 38 30 | IBAND 900E 180
30 20 0d 0a 0d 0a 4f 4b 0d | 0 OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d | AT+CGMI
write: [AT+CGMI]
read : [AT+CGMI WAVECOM MODEMOK]
Message received: 0x06 / 0x0020
02 41 54 2b 43 47 4d 49 0d 0d 0a 20 57 41 56 45 | AT+CGMI WAVE
43 4f 4d 20 4d 4f 44 45 4d 0d 0a 0d 0a 4f 4b 0d | COM MODEM OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 52 0d | AT+CGMR
write: [AT+CGMR]
read : [AT+CGMR543_09gg.Q2406A 1364028 020305 19:10OK]
Message received: 0x06 / 0x0036
02 41 54 2b 43 47 4d 52 0d 0d 0a 35 34 33 5f 30 | AT+CGMR 543_0
39 67 67 2e 51 32 34 30 36 41 20 31 33 36 34 30 | 9gg.Q2406A 13640
32 38 20 30 32 30 33 30 35 20 31 39 3a 31 30 0d | 28 020305 19:10
0a 0d 0a 4f 4b 0d | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 53 4e 0d | AT+CGSN
write: [AT+CGSN]
read : [AT+CGSN351621000201970OK]
Message received: 0x06 / 0x0021
02 41 54 2b 43 47 53 4e 0d 0d 0a 33 35 31 36 32 | AT+CGSN 35162
31 30 30 30 32 30 31 39 37 30 0d 0a 0d 0a 4f 4b | 1000201970 OK
0d |
Received message type 06
IMEI : 123456789012345
Manufacturer : WAVECOM MODEM
Model : MULTIBAND 900E 1800
Revision : 543_09gg.Q2406A 1364028 020305 19:10
Serial device: closing device

Below are a known .gnokiirc configuration that work with iTegno 3000 GSM modem :

[global]
port = /dev/ttyS0
model = AT
initlength = default
connection = serial
use_locking = yes
serial_baudrate = 115200
handshake = software
sm_retry = 1
smsc_timeout = 10

[gnokiid]
bindir = /usr/local/sbin/

[connect_script]
TELEPHONE = 12345678
[disconnect_script]

[logging]

# where to log the debug output (on: stderr, off: /dev/null)
debug = on

# where to log the rlp debug output (on: stderr, off: /dev/null)
rlpdebug = off

# where to log X debug output (on: stderr, off: /dev/null)
xdebug = on

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: